Bathroom Fan FV08VKS2
This Panasonic
bathroom fan is designed to run continuously ensuring a healthy climate at low CFM levels 24 hours a day. NOTE: This NEW model can
also be configured for spot (non-continuous) ventilation. This
bathroom fan is also built to take care of the homeowners spot ventilation needs when the room is occupied. This
bathroom fan kicks-up to a maximum level of 110 CFM when the switch is turned on. A High/Low Delay Timer, located inside the fan unit, is utilized to return the
bathroom fan back to the pre-set continuous ventilation mode.
A NOTE ON SWITCHING THIS FAN:
There are a variety of ways that this bathroom fan can be switched. When contact with the high speed (red) wire is opened - the countdown begins to turn the fan down to the continuous operation (low) speed. As the wiring diagram indicates - it is also possible to introduce an additional switch to override the fan and turn it off altogether. This bathroom fan is equipped with a CustomVentT Variable Speed Control. This allows the bathroom fan to run continuously at a pre-set lower level of 0-110 CFM that can then be elevated to a maximum of 130 CFM when the switch is turned on. A High/Low delay timer (adjustable up to 60 minutes), will then return the fan to the minimum CFM level after a period of time set by the user.
So Quiet You Might Not Know it's On
This WhisperCeiling Panasonic model features a totally enclosed condenser motor and a large, double suction blower wheel to quietly move air. A small wheel turning very fast will create more noise than a large wheel turning more slowly for a given airflow. Our fan uses a wide blower wheel that moves a large amount of air at reduced RPMs. The blower wheel is also designed to draw air in from both sides, which helps keep the noise down, as there is more area for the air to enter the wheel. In fact, it is quiet enough that you might not even know it's on.
Continuous, Trouble-free Operation for Many Years
This fan is designed to give you continuous, trouble-free operation for many years thanks in part to its high-quality components and permanently lubricated motors which wear at a slower pace. Also, since heat is always detrimental to motor life (the cooler the environment, the longer the motor will last), we designed the electrical configuration of this model's condenser motor to allow it to operate at lower temperatures, increasing the life of the motor and bearings. And, the fan housing is made of heavy-gauge zinc galvanized steel and painted to protect it from rust.