|
|
|
HomeProductsInc
|
|
Laundry Ventilation Solutions
Dryer Booster Fans are designed for long duct runs and multiple elbows which otherwise can cause extended drying time plus lint and moisture build-up within the dryer duct. Booster fans should be added when the dryer duct length exceeds 25 feet with no bends, 20 feet with one bend or 15 feet with two bends.
Dryers were designed for an outer wall directly vented out. In today's home, condo and apartment designs the laundry has been moved to interior locations.
When the dryer is on, Fantech's patented pressure sensing switch automatically turns the booster fan on. The warm, moist air is exhausted quickly. All of Fantech's Dryer Boosters can be used on runs up to 130 feet except the DBF110 which is effective up to 108 feet.
|
|
|
DBF4XLT "Intelligent" Dryer Booster
The newest dryer booster fan from Fantech is the most advanced in the industry. The unit can be used to effectively boost dryer exhaust in duct runs up to 130 feet. Fan features galvanized steel housing and integrated airflow sensing switch. Additional components include: mounting bracket, quick-connect/disconnect duct collar, 5V2 foot power cord with plug plus wall-mount indicator panel. LED light on wall panel lets homeowners know fan is working properly.
|
|
|
|
DBF4XL Metal Dryer Booster
Tap into the power of this dryer booster fan which can be used on duct runs up to 130 feet. Includes fan with galvanized steel housing, automatic pressure sensing switch, mounting bracket, hardware and 51/2 foot power cord with plug. Pressure switch activates fan when dryer comes on. Backward inclined impeller allows lint to pass through the fan.
|
|
|
|
DBF110 Dryer Booster Fan
This Fantech Dryer Booster Fan is engineered of thermoplastic resin and features an integrated automatic pressure switch. It can be used on dryer duct runs up to 108 feet. The fan's backward inclined blades allow lint to pass through the fan. |
|
|
|
RVF4XL Exterior-Mount Exhaust Fan
Fantech's popular exterior-mount exhaust fan with white, powder-coated metal housing can be used for dryer boosting when paired with a DB10 Pressure Switch (purchase separately). Ideal for condos and apartments as well as homes. Effective on duct runs up to 130 feet. Pressure switch automatically activates the fan when the dryer comes on. |
|
|
|
DBLT4 Lint Trap
Paintable galvanized metal lint trap for dryer boosting applications. Use when duct length between dryer and booster fan is less than 15 feet. Fits 4-inch duct. Features pull out door with view window, removable lint filter for easy cleaning and 1/2" flange for flush mount installation. |
|
Pressure Switch for RVF4XL
Automatic pressure switch allows for fully automatic operation of RVF4XL dryer booster fan. Fan runs for 10 minutes when positive pressure is sensed in the duct then shuts off and turns on again as needed. Switch suitable for 115 volt supply. 2 amp rating. |
|
Fully Automatic Fan Mounted Pressure Switch
|
|
Shipping cost are estimated - you will be charged only Actual Shipping Cost + $2 pack/box.
|
HomeProductsInc.com
The internet division of Tri-County Consultants, Inc.
Products & Parts - Call Mon-Fri 8:00 AM - 5:00 PM PST
Toll Free 866-368-8663 E-Mail Us
NuTone® and Broan® are trademarks of Broan-NuTone,LLC, its subsidiaries and affiliates.
All others brands are trademarks of their respective owners.
©1997 - Tri-County Consultants, Inc, all rights reserved -- Site by Acta Design
|
|
|
