There is a very large selection here of ventilating/heating accessories for installation including roof caps, dampers, in-line adapters, etc.
Wall Caps and
Roof Caps
885 Wall Cap with spring operated weather louver and transition. Uses 3 or 4" round duct. Choice of baked black enamel on gavenized steel or aluminum.
634 Black finish but Paintable roof cap with backdraft damper and bird screen for 3-1/4" x 10" or up to 8" round duct.
613 Wall Cap For 12" round duct. Aluminum natural finish.
$47.69 Qty:
639 Wall Cap for 3-1/4 x 10" duct. Spring loaded backdraft damper. Built in bird screen. Baked black enamel finish.
$17.15 Qty:
642 Wall Cap For 3" or 4" round duct. 4 to 3" transition included. Built in damper. Aluminum.
$13.29 Qty:
643 Wall Cap for 8" round duct. Aluminum.
$43.98 Qty:
Louvered Wall Cap for round ducts.
Qty:
641 Wall Cap for 6" round duct. Built in backdraft damper and bird screen. Aluminum.
$34.90 Qty:
WC650 Wall Cap 4" round duct.
Includes rigid through-wall duct collar. White plastic finish.
$10.20 Qty:
611 Roof Cap For flat roof. Fits up tp 8" round duct. Aluminum.
$40.60 Qty:
611CM Roof Cap For curb mount installation otherwise same as 611.
$47.69 Qty:
612 Roof Cap For flat roof. Fits up tp 12" round duct. Aluminum.
$76.35 Qty:
612CM Roof Cap For curb mount installation otherwise same as 612.
$81.15 Qty:
Transitions & Elbows
Transition
Converts 10" Round to 8" Round Duct.
$20.45 Qty:
877 Transition 6" round to 3-1/4 x 10".
$15.80 Qty:
886 Transition 7" round to 3-1/4 x 10". 8" long.
$15.80 Qty:
Adjustable Elbows for round ducts
Qty:
839 Elbow 90 degree For use with 3-1/4 x 10" Duct.
$14.45 Qty:
428 Vertical Elbow for 3-1/4" x 10" duct.
$14.05 Qty:
429 Horizontal Elbow for Horizontal elbow for 3-1/4" x 10" duct.
$23.49 Qty:
430 Short Eave Elbow for 3-1/4" x 10" duct. Includes backdraft damper and grill.
$30.55 Qty:
431 Long Eave Elbow for 3-1/4" x 10" duct. Includes backdraft damper and grill.
$30.55 Qty:
Round Grills
Sleeve with Damper
Qty:
Roof Kit RVK1A Complete kit designed to vent kitchen or bath fan through a slanted roof. Works with both 3" and 4" ducted units. Comes with 8 ft flexible hose
$35.25 Qty:
Wall Kit WVK1A Complete kit designed to vent kitchen or bath fan through a wall. Works with both 3" and 4" ducted units. Comes with 5 ft flexible hose
$17.19 Qty:
3-1/4 x 10" 24" long
$11.55 Qty:
Non-Insulated Flexible Ducts 25 foot length.
Qty:
Insulated Flexible Ducts 25 foot length.
Qty:
Round Ducts galvanized.
Qty:
Upgrade bath fan performance
With this all-in-one kit
Simply remove the grill and motor mount, install the new mounting and motor then add the grill.
Kit includes a new, quieter fan motor, a motor mount and modern white grill.
• Quick, takes only 10 minutes
• New motor is 60 CFM, 3.0 sones
• Sound reduced up to 50%
• Air movement increased up to 20%
Shipping cost are estimated - you will be charged only Actual Shipping Cost + $2 pack/box.
HomeProductsInc.com
The internet division of Tri-County Consultants, Inc.
Products & Parts - Call Mon-Fri 8:00 AM - 5:00 PM PST
Toll Free 866-368-8663 E-Mail Us
