Home > Attic Fans and Wholehouse Fans > Attic Fan (Roof Mount) >

Broan Attic Fan Roof Mounted 350BR

Broan 350BR 3.6 Amp, Brown, Roof Mounted Powered Attic Ventilator
Item #: 350BR
Retail: $195.96 Price: $149.07
You Save: $46.89 (23.9%)
There are no reviews yet.
Write a review

Broan 350BR Roof Attic Fan

When you purchase a Broan 350BR Roof Attic Fan, consider the air trapped in your attic that can easily reach 200 degree's or more. The Roof Attic Fan has an automatic thermostat which allows you to choose when it comes on at between 70 or 120 degrees. This Broan 350BR Roof Attic Fan comes in a brown dome shape, blending and mounting nicely to your roof. Too often, attic ventilation is overlooked, not to mention ignored as a place for energy savings. That's where Broan attic fan solutions make sense.


  • Attic Size: Up to 1500 sq. ft.
  • Amps: 3.6
  • CFM: 1050
  • Height: 8"
  • Dome Diameter: 23-1/4"
  • Dome Material: PVC

Select one that best suits the attic size and shingle color. 350BK(Black) sold separately

Attic Fan Roof Mounted 350BR

amperage 3.6
Attic Size 1500
CFM 1050
Description PAV-Roof Mount
Diameter 23.25
Dome Material PVC
Height 8
Housing Height 8
Housing Length 22.25 Sq
Housing Width 23.25 Dia Dome
Includes Thermostat Yes
Inlet Area 3.5
Installation Type Roof Mount
Mesh Screen Mesh screen keeps out birds and insects
Motor Thermally protected, permanently lubricated motor.
Rain Guard 3 7/8" high splash guard helps keep out rain.
RPM 1000
Solar No
Sones NA
Voltage 120
Width 22.25

Use this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer at the address
or telephone number listed in the warranty.
2. Before servicing or cleaning unit, switch power off at service
panel and lock the service disconnecting means to prevent
power from being switched on accidentally. When the service
disconnecting means cannot be locked, securely fasten a
prominent warning device, such as a tag, to the service panel.
3. Installation work and electrical wiring must be done by a qualified
person(s) in accordance with all applicable codes and standards, including fire-rated construction codes and standards.
4. Sufficient air is needed for proper combustion and exhausting
of gases through the flue (chimney) of fuel burning equipment
to prevent backdrafting. Follow the heating equipment manufacturer's
guidelines and safety standards such as those published
by the National Fire Protection Association (NFPA), and the
American Society for Heating, Refrigeration and Air Conditioning
Engineers (ASHRAE), and the local code authorities.
5. When cutting or drilling into wall or ceiling, do not damage
electrical wiring and other hidden utilities.
6. The wiring must be permanent. DO NOT USE AN EXTENSION
CORD! Use 14 GA. MINIMUM copper wire. Although the Powered Attic Ventilator may be wired directly to power, we advise that
some type of shut off switch be installed in the line. Please see
the section on electrical wiring for suggested wiring diagrams
and instructions.
7. This unit must be grounded.
8. Do not use this unit with any solid state speed control device
For general ventilating use only. Do not use to exhaust hazardous
or explosive materials and vapors.
2. To avoid motor bearing damage and noisy and/or unbalanced
impellers, keep drywall spray, construction dust, etc. off power
3. This unit has an unguarded impeller. Do not use in locations
readily accessible to people or animals.
4. Fan is equipped with a thermostat which may start fan automatically.
To reduce risk of injury or electric shock while servicing or
cleaning unit, switch power off at service panel and lock service
panel to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked,
securely fasten a prominent warning device, such as a tag, to
the service panel.
5. Home Ventilating Institute (HVI) recommends one square foot
of open air inlet per 300 cfm of fan capacity. The best location
for these air intake vents are under the eaves with direct access
to the attic. Failure to provide these intakes could cause
natural-draft gas appliances to backdraft.
6. Your attic fan installation will create a screened opening into
your attic space. During a heavy rain storm there could be a
light spray of rain into this attic space. This is a normal condition
with all attic ventilators and will not cause any damage to
the structure. We recommend that you do not store any valuable
articles directly under the fan opening in the roof. During
extreme rain and wind storms you may want to turn on your
attic ventilator to prevent excess moisture accumulation in your
7. Records show, under ideal conditions, exposed galvanized steel can remain rust free up to 100 years. For best protection, the
exposed portion of the roof sheet should be painted, especially
in areas of unusually high industrial air pollution. Follow paint
manufacturer's instructions for good adhesion.
8. This ventilator is intended for roof installation. The Broan Model
353 Gable Mount Ventilator is available for side wall applications.
9. The dome may be painted with a high-quality paint. Follow
the paint manufacturer's recommendations for PVC plastic or
aluminum, as appropriate.
10. Please read specification label on product for further information

Related Items:
Home Products Inc.
Ph: 866.368.8663
Hrs: MON-THU 8am to 5pm
        FRI 8am to 4:30pm PST
Broan® and NuTone® are trademarks of Broan-NuTone, LLC,
its subsidiaries and affiliates.
All other brands are trademarks of their respective owners.

© 2011 Q2U, LLC a limited liability company. All Rights Reserved.