Home > Ironing Centers > IronAway Ironing Centers >
What side would you like the hinge?
Would you like a 180 degree swivel?
In Wall Ironing Center IronAWay E342
The In Wall Ironing Center Ironaway Model E342 ironing board, has an hot iron storage compartment, storage shelf, full length piano hinge made to order hinges can be right or left side of cabinet, ironing board cover and a light, rocker switch,and appliance outlet, indicator light for off on notice and safety door switch when board it up, does not allow electricity to flow. This In Wall Ironing Center Ironaway E342 comes with a garment hook optional garment bar may be added and is made of poplar wood. The In Wall Ironing Center optional swivel board has to be added to your order as it is an option, and is made of metal to prevent any rust or warp. This In Wall Ironing Center Ironaway E342 allows you to customize a design that makes your ironing center and ironing board to fit your needs, surface mount or cut into the wall. This In Wall Ironing Center has an illuminated rocker switch turns power on and off. The E342 Ironing board has a 42 inch ventilated steel ironing board and cover that comes in your center, their are options that can be added to your center like swivel ,hot iron rest, cord wrap, garment bar, rowenta iron, surface mount kit, sleeve board (this will not fit into the center when door is closed) Door options, white flat, white raised, oak raised, pine raised. Standard comes with the birch flat door, stain or paintable with long piano hinge for sturdy and durability. Rough in Dimensions. Wide 14 1/4 xL47.7/8 x D3 7/8 Finish DimensionsWide15 x L47 7/8" x D7 7/8
In Wall Ironing Center
The user can adjust height of board after installation with a 4" differential between a maximum and minimum height when the swivel option is chosen.
Ironing Board Cover and Pad are included.
The interior has been painted a cool gray.
Lighted Rocker On/Off Switch.
Unit can be provided with a left hinged door (without garment hook) upon request. Right hinge is standard. 2 Storage shelves 9 1/4 long by 3 5/8 wide
Unit may be surface mounted (unit extends approximately 6 7/8" into room) or recessed (unit extends approximately 3" into room) into any wall with standard 16 inch center studs.
See table in specification sheet (above) to determine desired ironing board height above the floor. The user can adjust height of board after installation with a 4" differential between a maximum and minimum height.
Simple Install! Identify the location, cut and remove the drywall, slip the unit between the studs and attach it with the installation screws provided.
All models are pre-assembled and ready to install.
Fits between standard 2 x 4 studs on 16" centers. Install at the height of your choice, typically 34"-36" from the floor. Rough in Dimensions. Wide 14 1/4 xL47.7/8 x D3 7/8Finish DimensionsWide15 x L47 7/8" x D7 7/8
120V, 15 Amps.
Pigtails are provided in bottom of wire way for hookup to supply line. Make entrance into knockouts provided in top and bottom of wire way through left-hand vent hole.
Hinge Location Right or Left sideReplacement Cover Pad
Electric Cord Wrap
Hot Iron Rest
Surface Mount Trim
SWIVEL IS AN OPTION AND IS AN ADDITIONAL PURCHASE
White Flat MDF Covered on Poplar Cabinet
Birch is Stain or Paintable Unfinished Door
Maple is Raised Unfinished Maple Wood Door
Pine is Raised Unfinished Wood Door
Oak is Raised Unfinished Wood Door
White is Raised and Finished Door
Mirror has a 1/4 Plated Glass with Polished Edge Finish
Built in Ironing Center IronAWay E342
|Rough in Dimensions.
|| W14 1/4 xL47.7/8 x D3 7/8|
||Recessed, Surface Mount|
|Optional Garment Bar
|Optional Sleeve Board
|| W15 x L47 7/8" x D7 7/8" Finished Dim.|
|Wall Opening Depth
|Wall Opening Height
|Wall Opening Width
||Limited One Year|
How do we get replacement cover and pads?
Ironing Board Cover and Paid is a standard feature on all units. Replacement cover and pads can be obtained directly from IRON-A-WAY. In fact, you can order online right now!
If we don’t order the swivel now, can we get it later?
The swivel is not a retrofit item. Since it utilizes more interior space due to its rugged undercarriage, the frame on a swivel cabinet is deeper than cabinets without swivels. For this reason, swivels must be ordered at the time of purchase and cannot be added later. Where applicable, all other options available on the ironing centers can be added after the original purchase.
Can we order the ironing center without a door?
“No Door” option is one of the available options. If selected, the unit will arrive without a door allowing you to match custom cabinetry. When this option is selected the piano hinge and door hardware is not included with the unit. This is done so you can match hardware with your cabinetry.
Does the door come pre finished?
All wood doors come unfinished so you can customize your unit to match the room décor. Interior has been painted a cool gray saving you hours of unnecessary finishing time.(NE-242 with white flat door comes standard with white interior and exterior color.)
What are the door dimensions?
Door dimensions for all models except the A-46 and AL-42 are 15” W X 47 7/8”. The Model A-46 and AL-42 door dimensions are 15" X 60 5/8”.
Can the door be hinged on the left side?
Yes, all units may be ordered with a left-hand hinge at no additional charge. All units come standard with a right-hand hinge. (As you face the unit the hinge is on the right-hand side of the cabinet.)
Will it hold all irons?
The hot iron storage area is designed to hold the majority of all major brands of irons with the exception of very large, specialty irons designed for the sewing industry.
What is the warranty?
One-Year Limited Warranty from the date of purchase. Warranty covers all defective parts returned to factory for replacement, other than light bulbs, installed units, finished or stained doors, ironing board cover and pad. The warranty does not include labor for installation or replacement.
Can the board swivel before it is lowered completely into the ironing position?
No, the board must be completely lowered before the board can be swiveled.
Is the white colored door a paintable surface?
The white flat door is melamine. The white raised panel is a thermo foil. Both are a finished surface not intended for paint.
Tip Of The Day
Home Products Inc.
Hrs: MON-THU 8am to 5pm
FRI 8am to 4:30pm PST
Broan® and NuTone® are trademarks of Broan-NuTone, LLC,
its subsidiaries and affiliates.
All other brands are trademarks of their respective owners.
© 2011 Q2U, LLC a limited liability company. All Rights Reserved.