|
|
Home > Ironing Centers > IronAway Ironing Centers >
|
Ironaway NE342 In Wall Ironing Board
|
Item #: NE3421AU
Retail: $305.89
Price: $219.10
You Save: $86.79 (28.4%)
|
In Wall Ironing Board IronAWay NE342
The In Wall Ironing Board Ironaway Model NE342 built in Iron a way center is just what you need if an electrical outlet is
easily accessible. This In Wall Ironing Board Non electric Ironing Board is made with the poplar solid wood material for a non electric application . The In Wall Ironing Board NE342 Built in Ironing Center by Iron a Way features a hot iron storage compartment, 42 inch
ventilated steel ironing board with cover and pad, a full length piano hinge when a door is ordered, garment hook. Options sold in addition to the standard features are available sleeve
board, hot iron rest, electric cord wrap, garment bar, adjustable swivel board, Rowenta DM880 Iron, Steam Dry Iron, Sleeve Board, Surface Mount Trim, in case you do not want to cut the wall. This is a step up from the NE242 that allows more options at a comfortable price.
Build in Ironing Board NE342 Built In Ironing Center
Features:
- Comes standard with birch veneer door, door is made from multi density fiber board and a piano hinge.
- The user can adjust height of board after installation with a 4" differential between a maximum and minimum height when the swivel option is add as an optional choice.
- Ironing Board Cover and Pad are included.
- The interior has been painted a cool gray made of solid poplar wood.
- Non-Electric your power outlet is conveniently nearby.
- Unit can be provided with a left hinged door (without garment hook) upon request. Right hinge is standard.
- Piano hinge located on inside of door withn a standard birch door
Surface Mounting:
- Unit may be surface mounted (unit extends approximately 6 7/8" into
room) or recessed (unit extends approximately 3" into room) into any
wall with standard 16 inch center studs.
- See table in specification sheet to determine desired ironing board
height above the floor usually 20 to 24 off the floor. The user can adjust height of board after
installation with a 4" differential between a maximum and minimum
height.
Installation:
- Simple Install! Identify the location, cut and remove the drywall,
slip the unit between the studs and attach it with the installation
screws provided.
- All models are per-assembled and ready to install.
- Fits between standard 2 x 4 studs on 16" centers. Install at the height of your choice, typically 34"-36" from the floor.
Electrical:
- 120V, 15 Amps.
- Pigtails are provided in bottom of wire way for hookup to supply
line. Make entrance into knockouts provided in top left corner and bottom of wire
way through left-hand vent hole.
Optional Accessories:
Built In Ironing Board IronAWay NE342
Technical Specs
|
Electric
|
No |
|
Installation Type
|
Recessed, Surface Mount |
|
Light Included
|
No |
|
Optional Garment Bar
|
Yes |
|
Optional Iron
|
Yes |
|
Optional Sleeve Board
|
Yes |
|
Overall Size
|
15" x 47 7/8" x 7 7/8" |
|
Swivel Board
|
Yes |
|
Timer
|
No |
|
Voltage
|
120 |
|
Wall Opening Depth
|
3.875 |
|
Wall Opening Height
|
47.125 |
|
Wall Opening Width
|
14.25 |
|
Warranty
|
Limited One Year |
 Specification Installation
Features Include
- 42” Ventilated Metal Board
- Premium Hot Iron Storage
- Additional Storage Shelf
- Garment Hook
- Unfinished Flush Birch Door
- Full Length Piano Hinge
- Ironing Board Cover and Pad
- Fully assembled and ready to install
optional features
How do we get replacement cover and pads?
Ironing Board Cover and Paid is a standard feature on all
units. Replacement cover and pads can be obtained directly from
IRON-A-WAY. In fact, you can order online right now!
If we don’t order the swivel now, can we get it later?
The swivel is not a retrofit item. Since it utilizes
more interior space due to its rugged undercarriage, the frame on a
swivel cabinet is deeper than cabinets without swivels. For this
reason, swivels must be ordered at the time of purchase and cannot be
added later. Where applicable, all other options available on the
ironing centers can be added after the original purchase.
Can we order the ironing center without a door?
“No Door” option is one of the available options. If
selected, the unit will arrive without a door allowing you to match
custom cabinetry. When this option is selected the piano hinge and door
hardware is not included with the unit. This is done so you can match
hardware with your cabinetry.
Does the door come pre finished?
All wood doors come unfinished so you can customize your
unit to match the room décor. Interior has been painted a cool gray
saving you hours of unnecessary finishing time.(NE-242 with white flat
door comes standard with white interior and exterior color.)
What are the door dimensions?
Door dimensions for all models except the A-46 and AL-42
are 15” W X 47 7/8”. The Model A-46 and AL-42 door dimensions are 15" X
60 5/8”.
Can the door be hinged on the left side?
Yes, all units may be ordered with a left-hand hinge at
no additional charge. All units come standard with a right-hand hinge.
(As you face the unit the hinge is on the right-hand side of the
cabinet.)
Will it hold all irons?
The hot iron storage area is designed to hold the
majority of all major brands of irons with the exception of very large,
specialty irons designed for the sewing industry.
What is the warranty?
One-Year Limited Warranty from the date of purchase.
Warranty covers all defective parts returned to factory for replacement,
other than light bulbs, installed units, finished or stained doors,
ironing board cover and pad. The warranty does not include labor for
installation or replacement.
Can the board swivel before it is lowered completely into the ironing position?
No, the board must be completely lowered before the board can be swiveled.
Is the white colored door a paintable surface?
The white flat door is melamine. The white raised panel is a thermo foil. Both are a finished surface not intended for paint. Tip Of The Day
Steam ironing removes creases faster than dry ironing
because when fabrics are damp the fibers are open so the creases haven't
taken hold. Do the ironing centers fit between the studs?
All models, except the NE-242 (surface mount), are designed to fit between standard 2” x 4” studs on 16” centers.
Can the ironing center be installed at any height?
One of the benefits of owning an ironing center is you
can have it installed at your desired ironing board height. However,
most ironing centers seem to be installed with a 34” – 35” ironing board
height.
Are the ironing centers difficult to install?
The ironing center is very easy to install. The product
basically requires identifying the desired location, cutting and
removing the drywall, slipping the unit between the studs and attaching
it with the installation screws provided. All units are pre-assembled
and ready to install.
Are the electrical models hard to wire?
Electrical models are pre-wired so they only need to be
pigtailed with the incoming electrical wire. The pigtails are located
at the bottom of the electrical raceway. All electrical work must be
done in accordance with all applicable electrical codes. Electrical
models utilize 15 AMPS.
Where does the electrical wiring enter the ironing center?
The electrical models contain a raceway that has an
knock-out for entry of the house's electrical wire at the top of the
raceway.
Can the ironing center be recessed into a cabinet rather than in a wall?
The ironing center can be recessed into a cabinet. Since
your cabinet will have the door, you simply purchase your ironing
center without a door. However, the door dimension for the model of your
choice is very important since it determines the opening size
requirement for your cabinet. An added tip for this type of
installation is to purchase the surface mount trim and add it to the
ironing center prior to installation in the cabinet.
The surface mount package trims out the sides of the ironing center
so they are flush on all four sides. This will make the installation
into the cabinet easier and quicker.
Is the wood on the cabinet frame that extends into the
room when recessed or the entire cabinet when surface mounted
pre-finished?
The exterior of our cabinets, as well as our doors, are unfinished so that you can stain or paint to match your décor.
Do most homes stain the cabinet frame to match the door or do they match the cabinet frame to the wall?
This is really a matter of choice but it would be typical that the cabinet frame matches the ironing center door.
Can I make my ironing center flush with a wall or cabinet?
You can make your ironing center flush with the wall or
the cabinet provided that the depth of the wall or cabinet is equal to
the depth of the ironing center. Irons by themselves require more depth
than a typical 2"x4" wall so unless you customize the installation, the
ironing center will extend into the room some distance.
Can the ironing center be installed into metal studs?
This type of installation can be completed, but you will
need to use mounting screws designed for use with metal studs.
Additionally, given the design of metal studs, in your rough-in opening,
one stud will need to be trimmed out with a piece of wood to fill the
cavity designed in the bend of the metal stud.
Do all the units have to be recessed?
With the exception of the NE-242, all cabinets are
designed to be recessed mounted. However, all models can be surface
mounted. When doing so, we recommend adding the surface mount trim
package (except on the NE-242) so your cabinet sides are flush with the
cabinet frame.
Frequently Asked Product Questions
What type of wood do you use in making your ironing centers?
The cabinet frame is made of poplar and the door is
dependent upon the what you select. (i.e. Oak, Maple, Pine.) We use
poplar for both its ease of use in construction, but also its ability to
match color when staining doors of other wood species (i.e. Oak, Maple,
Pine.)
Where is the electrical outlet to plug in the iron?
The electrical outlet is at the bottom of the raceway
where it is out-of-sight and more conveniently placed when using your
ironing center.
Can I add an electrical raceway to my non-electric model?
You can add our electrical raceway to a model NE-342 but
not to our Model NE-242. Additionally, by adding any other kind of
electrical parts (other than an IRON-A-WAY raceway) to either model
nullifies your warranty and we are not responsible for any damage it may
cause to your ironing center or your home.
What is the recommended size of the light bulb?
We recommend a 30R20 with a standard base and 2 1/2" diameter. This bulb is available at most stores that sell light bulbs.
Does all the door hardware come with the no-door option?
No door hardware comes with the no-door option since it's
assumed that the installer will desire to match other cabinet door
hardware.
Can you paint either the white flat or white raised panel door?
Painting either the white flat or white raised panel door
is not recommended. The flat birch door is recommended when painting a
flat style door and when painting a raised panel door the determination
is made on the desired grain of wood. Each door will show a slightly
different texture. Oak has a more open grain, Maple more closed and
Pine a softer wood.
What irons fit into the ironing center?
The ironing centers being produced today contain an
over sized storage area and hold the majority of irons being sold today.
If you own an ironing center that was purchased many years ago, given
the changes in the styles of steam irons, please contact our customer
service for specific iron models that will store within your ironing
center.
Is the hot iron rest different from the hot iron storage?
The hot iron rest is a feature that allows you a place to
rest the iron while turning your garment. The hot iron storage is the
place where you store your iron when you are ready to fold-up the board
and close the door.
What type of material is the cover and pad?
Both the cover and the pad are heavy duty and industrial
grade designed for years of use. The cover is a 50/50 poly/cotton blend
manufactured with a finish designed for steam irons. The pad is a 21
oz needle punch material that provides a level of cushioning preferred
by our customers over the years.
What are the electrical requirements?
All electrical models are rated at 120V ac, 1500W max, 15 amps.
Does the swivel board turn in both directions?
When the ironing board is lowered, the swivel allows the
board to turn 90 degrees in either direction until the board is parallel
with the wall. Additionally, there are conveniently placed stopping
points as the board is being turned.
At what point does the board begin to swivel?
The mid-point where our board begins to swivel is
dependent upon the size of the cabinet. On the cabinets that hold our
46" board, the swivel point is 26 1/4" from the wall. On the cabinets
that hold our 42" board, the swivel point is 26 5/8". (For actual
measurements, please see the specifications for the model you are
selecting.)
Does the ironing board have to come down all the way before swiveling?
The swivel mechanism does allow for the board to clear
the cabinet allowing it to begin swiveling before it has been fully
lowered. However, we recommend that you have the necessary clearance
dimensions as shown in our specifications for the model that you are
selecting.
|
|